Yesterday I finally managed to finish calibrating the 3d printer that I've been building for about a year now. I didn't spend enough time on it before, but since I've joined the 3D Printing community on Google+ I got more focused on actually finishing the thing.
This is the first non-calibration object I printed.
(I forgot to turn of the anti-gravity engines for this video, sorry).
With the addition of the fan and properly levelling the bed things started to look much better. However when printing thin walls I kept on seeing "row of dots instead of a line" and it was not laminating properly. The parameter in slic3r I found that helped was "Extrusion multiplier" and I ended up on 1.75! I just realised though that I should have rather increased then hotend temperature above the 185°C I was using... will do that next time :)
As you can see I printed some stubbys (one with a screw on bottom and its main body printed with support) and a couple of rings.
The thread actually works!
Thanks to
openhardware from where the
printrbot was sourced. A lot of additional community support came from Org and Gert from
house4hack, thanks a lot guys!
Update: printer layout for KobusJ:
Posts
